Braun Syncro Shaver

Water is one great source of carpet damage especially in flood prone states such as Seattle. A water-damaged carpet poses a threat to health for everyone in the household or work place. The kind of water that soaked the carpet is determining factor whether the carpet can be salvaged or not. You definitely need to investigate what kind of water that flooded you carpet to be able assess if it is worth any effort of repair.

Professionals in water damage restoration industry categorized water depending on its source and pollutants it may contain. Black water is by far the worst kind because it contains harmful contaminants usually from untreated industrial waste water. Any carpet that has been exposed to it is now likely to carry viruses and bacteria. It can no longer be salvaged, but must be disposed of properly for health reasons.

Another kind of water that may soak your carpet is gray water. This is water coming from dishwashers, washing machines or even toilet overflows; so called gray due to its color and mild contents of pollutants. Carpets flooded by gray water are salvageable and may be restored. Carpets drenched with clean, clear water are the easiest to handle and the best to restore. However, in both cases the old, damaged padding should be discarded and replaced.

The key element in any effort at repairing water-damaged carpet is time. A carpet that has been wet for 12 hours or more can start to grow mold and cause serious health problems. It is expensive to remove molds from your home and so you should try to avoid that in the first place. The longer the time before you rescue your wet carpet the worse it can get.

So to restore your carpet you should follow some basic steps in order to do it right. Of course, the first step is to eliminate the source of the water by fixing the leak or shutting off the source. Always determine whether restoration is feasible first with water damage to the carpet. Don’t waste your time and risk health issues if it is not even a salvageable carpet.

Next, you have to move the carpet away from the floor. You cannot dry it laying flat in there. Lift it up and, if possible, take it into the garage or hang it outside. Then tear the padding up and dispose of it in a safe manner. Keep the carpet elevated so that the air can circulate around it and any moisture can dry up. While it is hung to dry, you can start the cleanup of any remaining water in the room where the carpet came from. You have to dry the entire floor or place.

Fans and air conditioners can be used to circulate the air faster and help speed up the drying process in the room or building. After about ten to twelve hours the carpet should be ready to lay flat again. Once you lay it flat keep the air circulating and if you have a dehumidifier turn it on.

Always keep in mind not to attempt to salvage a carpet that has been damaged by black water. If you do this you risk serious health problems for you and your family. Doing it right by following the steps above will save you a lot of heartache and money in the long run. Water damage to a carpet can be costly if not done immediately and properly.

If you are looking for a highly recommended Seattle water damage restoration company, you need to go here : Top recommended Seattle water damage restoration Company

No related posts.